ZSJH Steel supported a warehouse project in Italy with drawing design and detailing, structural steel fabrication coordination, quality documentation and export packing. The workshop photographs show the progression from fabricated connections and dimensional checks to coated, identified members and protected shipping bundles. For this project, drawing design and detailing took three days, followed by approximately one month for fabrication and dispatch.

Fig1 Italy Steel Workshop – Tekla Overall Structural Model

Fig2 Italy Steel Workshop – Tekla Roof Framing and Connection Detail

Project information

Fabrication Inspection and Export Packing

From drawings to fabricated members

The supply package includes H-section members with welded end plates, stiffeners and connection attachments. Preformed bolt holes and individual identification labels are visible in the photographs. These details provide clear reference points for checking components against the shop drawings and organizing them for shipment. The supplied inspection photographs show checks of member length and connection geometry before dispatch.

Fig3 Warehouse Steel Columns and Connection Details

Fig4 Steel Beam Surface Preparation

Material and welding documentation

The project file includes a galvanized coil inspection certificate, welding test records and welding procedure qualification records. The coil certificate specifies EN 10346 S350GD+Z275 at a nominal thickness of 3.0 mm. The UT report identifies S275JR for the inspected structural members. These are separate material references for different parts of the supplied documentation. The welding records include processes 121 and 135. The supplied WPQR documentation names Shandong Hujiang Intelligent Assembly Co., Ltd. and records Bureau Veritas examination against NF EN ISO 15614-1:2017/A1:2019 Level 2. This documentation supports review of the manufacturing route; its qualification specimens are not a statement that every project member uses S355J2 or the same welding parameters.

Fig5 Galvanized Steel Coil Material Certificate Extract

Fig6 Welding Process Record Extract

Fig7 Welding Procedure Qualification Record Extract 

Weld inspection with recorded results

The ultrasonic self-inspection report UT-2026-005-1 lists 36 component entries across the GL, GZ, WGL and YPL groups. Each listed entry is marked qualified, with no excessive defects found. The report identifies ISO 11666:2018 as its testing basis and includes weld-location sketches. These results apply to the components and welds covered by the report. Workshop inspection photographs provide additional visual context for the checks carried out during fabrication.

Fig8  Steel Weld Inspection Before Coating

Fig9  Steel Connection Dimensional Inspection

Fig10 Warehouse Steel Weld UT Report Extract

Coating and export packing

The finished members are shown with a light grey coating and readable identification labels. For shipment, beams, columns and secondary sections were arranged in bundles with timber separators, securing straps and protective wrapping at selected contact points. The packing photographs document how the supplied members were grouped for dispatch, helping the receiving team identify and handle the steel package.

Fig11 Protected Steel Bundles for Export

Discuss your warehouse steel package

Planning a warehouse project in Italy or another overseas market? Send ZSJH Steel your drawings, component schedule, delivery destination and required supply scope. We can review the design and detailing requirements, fabrication package, inspection documents and export packing arrangements for your project.